Netscreen-5000 Interfaces; Netscreen-5200 Interfaces - Juniper NetScreen-5000 Series Installation And Configuration Manual

Hide thumbs Also See for NetScreen-5000 Series:
Table of Contents

Advertisement

NetScreen-5000 Interfaces

Each Secure Port Module (SPM) for the NetScreen-5000 Series system provides 2, 8,
or 26 physical Ethernet ports. Each of these ports can serve as a physical interface.
In addition, you can configure the Ethernet ports to host multiple virtual (logical)
interfaces.

NetScreen-5200 Interfaces

A NetScreen-5200 contains one management module (in slot 1) and one SPM. In
Figure 15, the device contains one 5000-8G SPM.
NOTE:
Not all SPMs are supported by every management module. See Table 3,
"Netscreen 5000-series Management Modules," on page 14 for more information.
Figure 15: NetScreen-5200 Interfaces
Status and Power LEDs
Ethernet 2/1
Ethernet 2/2
Ethernet 2/3
Ethernet 2/4
Modem Port
Console Port
Ethernet 2/5
Ethernet 2/6
Ethernet 2/7
Ethernet 2/8
Configuring the Device
MGT Port
HA Ports

NetScreen-5000 Interfaces

31

Advertisement

Table of Contents
loading

Table of Contents