Main Status Leds For The Device; Port Status Leds - Juniper NetScreen-5GT Wireless User Manual

Main Status LEDs for the Device

The device status LEDs indicate whether the device is operating properly. The following
table describes the status for each LED.
LED
POWER
STATUS
ADSL
(on the
Wireless ADSL
only)
WLAN

Port Status LEDs

The port status LEDs indicate whether the ports on the device are operating properly.
The following table describes the possible status for the ports.
LED
Link/Activity
10/100
NetScreen-5GT Wireless
Status Meaning
green Indicates the system is receiving power.
off Indicates the system is not receiving power.
blinking Indicates the system is functioning.
green
green Indicates the system is starting up.
red Indicates a diagnostics or system initialization error.
off Indicates the system is not operational.
green Indicates the ADSL loop is up.
off Indicates the ADSL loop is down.
slow blinking Indicates that a Wireless connection is established, but there is no
green link activity.
fast blinking Indicates that a Wireless connection is established. The blink rate is
green proportional to the link activity.
off Indicates there is no Wireless connection established.
LED Color Meaning of the LED
blinking green Indicates the device detects Ethernet traffic for the port.
off Indicates the port has not established a link with another device.
green Indicates the port has established a link with another device.
green Indicates the port is connected to a 100 Base-T device.
off Indicates the port is connected to a 10 Base-T device.
Status LEDs
33