Netscreen-5400 Fan-Tray Filter - Juniper NetScreen-5000 Series Installation And Configuration Manual

Servicing the Device
Figure 26: Inserting a NetScreen-5400 Fan Module
4. Secure the fan module in place by tightening the thumbscrews clockwise.

NetScreen-5400 Fan-Tray Filter

To replace the fan-tray filter:
1. Remove the fan tray (see "NetScreen-5400 Fan Module" on page 52).
2. Lay the fan-tray on a table filter-side up.
Figure 27: NetScreen-5400 Fan-tray Filter
3. Pull the filter from the Velcro backing.
53
Replacing the Fan Module