Limit Link Search - AOR AR-Mini Operating Manual

ADVANCED OPERATION

Limit Link Search

This enables a Linked Limit Search for
easy change of limit ranges.
1
Confirm that VFO is set.
2
Hold down the FUNC key and press
the dial knob to change the setting.
3
Turn the dial knob to select setting
number 08.
4
Hold down the FUNC key and turn
the dial knob to select "LTLNK".
5
Turn the dial knob to select setting
number 10.
6
Hold down the FUNC key and
turn the dial knob to select the
pattern number (0 to 9) into which
you want to set the Search Band
Memory numbers (L00 to L22,
refer to the list p.74)
pattern number
7
Hold down the FUNC key and turn
the dial knob to select the search
band memory number (0 to 22) to
be linked.
8
Turn the dial knob to select or
deselect the link number.
• A decimal point will be displayed
when the link number is selected.
• Beware that by default all link
numbers from 00 to 22 are
selected. Unselect the numbers
you don't need in your scan.
9
Hold down the FUNC key and turn
the dial knob to select the next
limit search number to be linked.
• Repeat steps 8 and 9 as many
times as necessary.
10
To return to VFO, press the dial
knob twice or V/M key twice.
11
Press the SCAN key to start a Limit
Link Search.
12
Press the V/M key to stop the Limit
Link Search.
37