CHANGING SETTINGS
Automatically Increasing
the Volume in FM
This setting is used for automatically
increasing the volume to 6 dB in FM
when a 12.5 kHz step is set.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 19.
3
Hold down the FUNC key and turn
the dial knob to set ON.
4
To return to the original display,
press the dial knob or V/M key.
Tips:
This setting is available only in FM.
Setting Tone Frequency
This is used to set one of the 50
selectable tone frequencies.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 20.
3
Hold down the FUNC key and turn
the dial knob to select the tone
frequency.
4
To return to the original display,
press the dial knob or V/M key.
Tips:
Tone frequencies are listed in the
table on page 73.
63