Naming Memory; Memory Scanning - AOR AR-Mini Operating Manual

ADVANCED OPERATION

Naming Memory

Memory can be named using up to 6
characters.
1
Confirm that MEMORY is set.
2
Turn the dial knob to recall the
desired memory to be named.
3
Hold down the FUNC key and
press the SCAN key.
• The cursor will blink.
4
Turn the dial knob to select a
character.
5
To change the cursor, hold down
the FUNC key and turn the dial
knob.
6
To store a name, hold down the
FUNC key and press the V/M key.
Tips:
• To change the character, repeat
steps 1 through 3, hold down
the FUNC key and turn the dial
knob to select the character to
be changed. Turn the dial knob to
select a new character and then
hold down the FUNC key and
press the V/M key.
• To check which frequency is
stored under the displayed name:
-Hold down the FUNC key and
press the SCAN key.
-Press the MODE key.
To revert to NAME display, press
the DIAL knob.
42

Memory Scanning

How to scan all memories.
1
Confirm that VFO is set.
2
Hold down the FUNC key and
press the dial knob to change the
setting.
3
Turn the dial knob to select setting
number 09.
4
Hold down the FUNC key and turn
the dial knob to select ALL.
5
To return to the original VFO, press
the dial knob or V/M key.
6
Press the V/M key to enter
MEMORY.
7
Press the SCAN key to start
Memory Scan.
8
Press the V/M key to return to
MEMORY.