Adjusting The Squelch - AOR AR-Mini Operating Manual

BASIC OPERATION

Adjusting the Squelch

1
To adjust the squelch, press the
dial knob twice.
2
To adjust the squelch, slowly turn
the dial knob clockwise.
28
x 2
3
Stop the dial knob when no noise
is emitted.
• This position is called "Threshold".
4
To cancel the squelch temporally,
press and hold the MONI key
• The squelch will be cancelled while
holding the MONI key.
Tips:
• The squelch level can be changed
by turning the dial knob as follows:
Increase direction (clockwise)
00 ➝ 01 ➝ (01) ➝ 02 ➝ (02) ➝ 03
➝ (03) ➝ 04 ➝ (04) ➝ 05 ➝ (05) ➝
06 ➝ 07 ➝ 08 ➝ 09 ➝ 10
Decrease direction (anticlockwise)
10 ➝ 09 ➝ 08 ➝ 07 ➝ 06 ➝ 05 ➝
(05) ➝ 04 ➝ (04) ➝ 03 ➝ (03) ➝
02 ➝ (02) ➝ 01 ➝ (01) ➝ 00
Some displayed squelch values
will not be changed, but in reality
the squelch level has changed.
• When the squelch volume level is
set at a high level, it may become
impossible to receive weak
signals.