Vfo Search; Skipping The Desired Frequency In A Search - AOR AR-Mini Operating Manual

ADVANCED OPERATION

VFO Search

VFO search consecutively monitors all
frequencies from 0.1 MHz to 1299.995
MHz.
1
Confirm that VFO is set.
2
Hold down the FUNC key and
press the dial knob to change the
setting.
3
Turn the dial knob to select setting
number 08.
4
Hold down the FUNC key and turn
the dial knob to select VFO.
• "VFO" will be displayed initially.
5
Press the dial knob to return to the
VFO.
6
Press the SCAN.
7
To start the VFO search, press the
scan key.
• When VFO search is paused, the
decimal point will blink.
8
To cancel VFO search, press the
V/M key or dial knob.
34
Skipping the Desired
Frequency in a Search
A frequency can be skipped in a search.
This prevents a search from being
stopped when a frequency that should
be cancelled is received. As many as
100 skipped frequencies can be stored.
1
Press the SCAN key to start the
search.
2
Press the V/M key for 2 seconds or
longer when the search is paused
on the frequency to be skipped.
• The skip memory number is
displayed.
3
Turn the dial knob to change the
skip memory number.
• This step can be skipped, but
the skip memory number will not
change.
4
To store frequencies in the skip
memory, press the V/M key for 2
seconds or longer.
5
Repeat steps 2 through 4 to store
other frequencies in the skip
memory.
• As many as 100 frequencies can
be stored.
Tips:
• In VFO, frequencies can be stored
in the skip memory through the
same procedure.
• Skip memory can be returned to
normal memory (refer to "Erasing
VFO Skip Memory" on page 60).