Setting The Dcs Code Phases; Turning The Beep Off - AOR AR-Mini Operating Manual

CHANGING SETTINGS
Setting the DCS Code
Phases
This setting is used for the phase of
DCS codes that have been set.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 26.
3
Hold down the FUNC key and turn
the dial knob to set the phase.
• The DCS code phase will not be
reversed when "NORMAL" is selected.
• When REV is selected, a phase of
the DCS code will be reversed.
4
To return to the original display,
press the dial knob or V/M key.
Tips:
This function has no icon. Therefore,
the setting status should be
confirmed in this procedure.
66

Turning the Beep Off

This setting is used for turning the beep
off.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 27.
3
Hold down the FUNC key and turn
the dial knob to set OFF.
4
To return to the original display,
press the dial knob or V/M key.