Table of Contents
Advertisement
Free time:
This is the time after which scanning will resume, whether or not the signal drops out.
Free time can be set between 1 and 60 seconds.
[OFF] means search will only resume after the signal drops, as set in "Delay time".
Default is [OFF].
8.
Press [ENT] and rotate the dial knob to select the desired timing.
9.
Press [ENT] to save the setting.
Auto store:
The first 50 busy frequencies located during search are automatically saved in memory
bank 39, for later review and scanning.
10. Press [ENT] and rotate the dial selector knob to set auto store ON or OFF (default).
11. Press [ENT] to save the setting.
12. Press [ENT] again, to save all of this group link page setting.
9.5.
SEARCH A GROUP OF LINKED SEARCH BANKS
Select the search group of previously linked search banks:
1.
Press [MENU] use the [▶] button to select [SRCH] and
then press [ENT].
2.
Use the [▶] button to select [GRP], then press [ENT].
3.
Input the search group number with the keypad.
To start scanning this group:
4.
Press [MENU], then use the [▶] button to select [SRCH]
and press [ENT].
5.
Press [ENT] again.
9.6.
COPY/ERASE/MOVE SEARCH BANKS, GROUPS AND PASS FREQ.
Follow this procedure to copy, move, and erase the contents of search banks and search
groups, also pass frequencies may be deleted.
1.
Press [MENU].
2.
Use [▶] to select [EDIT], then press [ENT].
40
Advertisement
Table of Contents
