Bank Link; Setting Bank Link; Select Scan; Adding Select Scan Channels In Memory Read - AOR AR-ALPHA Operating Manual

5-5 Bank Link

The AR-ALPHA has a built-in Bank Link function to allow scanning a single bank or a user-selected group
of memory banks.

5-5-1 Setting Bank Link

1. Press the
2. The Scan Group screen will appear.
Group: 00
Delay: 2.0s
Free: OFF
3. Rotate the sub dial to select the desired item, then use the
4. Validate with "Group Set" soft key or the MHz key.
Press the

5-6 Select Scan

Select scan enables you to 'tag' memory channels to make a temporary list up to 50 channels in the same
memory bank for scanning in a separate list called the SELECT SCAN LIST.

5-6-1 Adding select scan channels in memory read

1. Press the
2. Locate the memory channel to add select scan channel.
3. Press the
4. The 'SEL' icon will appear on the LCD.
key, then press and hold the
Scan group number 00, 01 ~ 19
Scan delay time
Scan free time
key if you prefer to cancel.
key to enter the memory mode.
key, then press the
key for 2 seconds.
0.1 ~ 9.9s (in 0.1 second steps)
OFF (00), 01～60 seconds
key.
68
or key to change.