Charging The Ni-Mh Battery; Charging The Ni-Mh Battery - AOR AR-Mini Operating Manual

CHANGING SETTINGS
Charging the Ni-MH
Battery
This setting is only available for the
supplied Ni-MH batteries. Never use
this setting for other batteries.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 30.
3
Hold down the FUNC key and turn
the dial knob to set "CHARG".
4
To return to the original display,
press the dial knob or V/M key.
68
5
To charge the battery, turn the
power off by pressing the PWR key
for 2 seconds or longer.
• "CHARG" will be displayed and "
" will blink.
6
Connect the AC adapter AA-mini
or DC adapter DC-mini.
• Refer to page 16, 21 to connect the
AA-mini or DC-mini
Note:
• Disconnect the AA-mini or DC-
mini after approximately 20 hours
have passed.
• Charging ends automatically after
24 hours in order to maintain
safety.
• In step 5, "CHARG" will be
displayed even if no battery is
installed. Therefore, you should
confirm that the specific batteries
are installed.
• The AR-mini may be turned on by
inserting the AA-mini or DC-mini
when no battery is installed or
when the batteries are depleted.
This is not a malfunction.