Reversed Tone Squelch Function; Using Dcs - AOR AR-Mini Operating Manual

ADVANCED OPERATION
Reversed Tone Squelch
Function
This facility reverses operation of 'tone
squelch'.
It is used when special radio systems
are employing mixed tones with no
voice. When enabled, the squelch
will cancel when normal speech is
transmitted (the squelch will open so
you can hear people talking) and mute
when the tone signal is transmitted.
1
Confirm that VFO is set.
2
Hold down the FUNC key and
press the MODE key several times
until REV TSQ is displayed.
3
Press the V/M key or dial knob.
• "T" icon will be displayed.
4
Hold down the FUNC key and
press the dial knob to change the
setting.
5
Turn the dial knob to select setting
number 21.
6
Turn the dial knob to select
REVTSQ.
7
Press the FUNC key and turn
the dial knob to select the tone
frequency.
8
To return to VFO, press the dial
knob or V/M key.
9
To cancel, press the FUNC and
MODE keys several times until VFO
is selected. Press the dial knob or
V/M key.

Using DCS

DCS (Digital Code Squelch) is set to
receive a signal which has been set by
the DCS. The DCS code can be set to
one of 104 codes.
1
Confirm that VFO is set.
2
Hold down the FUNC key and
press the MODE key until DCS is
displayed.
3
Press the V/M key or dial knob.
• "DCS" icon is displayed.
4
Hold down the FUNC key and
press the dial knob to change the
setting.
5
Turn the dial knob to select setting
number 25.
6
Hold down the FUNC key and turn
the dial knob to select a DCS code.
7
To return the original display, press
the dial knob or V/M key.
8
To cancel, press the FUNC and
MODE keys several times until VFO
is selected. Press the dial knob or
V/M key.
Tips:
When AM or Wide FM is set, the
tone squelch will be cancelled even
if the tone squelch icon is displayed.
Tone frequencies are listed on page
73.
47