Setting The Memory For A Memory Bank Link Scan - AOR AR-Mini Operating Manual

CHANGING SETTINGS
Setting the Memory for a
Memory Bank Link Scan
This setting is used for setting memory
banks that are linked for a scan.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 11.
3
Hold down the FUNC key and turn
the dial knob to select the memory
bank number to be linked.
4
Press the dial knob.
• The bank link mark will be
displayed.
58
5
Press the dial knob to return to
step 2.
6
To return to the original display,
press the dial knob or V/M key.
Tips:
When the memory bank link is
cancelled, repeat steps 1 through 4
and select the memory bank number
to be cancelled. Erase "." (bank link
mark) by pressing the dial knob.