Automatically Switching The Display Information; Setting Dcs Codes - AOR AR-Mini Operating Manual

CHANGING SETTINGS
Automatically Switching
the Display Information
This setting is used for switching the
display from the volume or squelch
display to the frequency display
automatically when the setting time has
passed.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 24.
3
Hold down the FUNC key and turn
the dial knob to select the setting
time to be changed.
• The setting time can be set as
follows; 0.5 seconds, 1 second, 2
seconds, 3 seconds, 4 seconds, 5
seconds and OFF
4
To return to the original display,
press the dial knob or V/M key.
Tips:
In step 3, the display will not be
changed automatically if OFF is
selected.

Setting DCS Codes

This is used to set one of the 104
selectable DCS codes.
1
Hold down the FUNC key and
press the dial knob to change the
setting.
2
Turn the dial knob to select setting
number 25.
3
Hold down the FUNC key and turn
the dial knob to select the DCS
code.
4
To return to the original display,
press the dial knob or V/M key.
Tips:
The DCS codes are listed in the
table on page 72.
65