Table of Contents
Advertisement
4-5 VFO SETTING
To go to the VFO setting menu, press the [F] key. Then press and hold the [VFO] key for two seconds.
Following screen will appear.
4-5-1 VFO SEARCH DELAY
The delay parameter affects the time the AR-DV1 will remain on an active frequency in VFO search
mode once the received signal has disappeared and the squelch is closed. This is particularly useful
for customizing how long the receiver will wait for a reply before continuing to search.
The parameter ranges are off, hold and 0.1 to 9.9 seconds in 0.1 second incremental steps.
(Default: 2.0 seconds)
To set the delay parameter, perform the following steps:
1. On the VFO search setting screen, use the [▼] key or [▲] key to select [DELAY].
2. Rotate the dial knob to select the delay time.
3. If "HOLD" is selected, the receiver will stop searching
4. To confirm entry, press the [ENT] key. To set other parameters, press the [▼] key.
4-5-2 VFO SEARCH FREE (PAUSE)
The search free (pause) parameter determines how long the receiver will remain on an active
frequency before resuming searching even if the signal is still busy. Search free helps keep you from
having to manually intervene to force the search to continue or use frequency lockout (pass).
The parameter ranges are off and 1 to 60 seconds. When the parameter is set to off, the receiver
remains on the busy frequency until the received signal disappears or the frequency is changed.
To set the parameter, perform the following steps:
1. In the VFO search screen, use the [▼] key or [▲] key to select [FREE].
2. Rotate the dial knob to set scan pause parameter (between 1 ~ 60 or off). To set search free to
off (zero), press the [PASS] key or enter "0" from the numeric keypad.
3. To confirm entry, press the [ENT] key. To set other parameters, press the [▼] key.
4-5-3 VFO SEARCH STORE
This menu is to select ON or OFF to save received frequencies in VFO search mode onto memory
bank 39. (Default: OFF)
26
Advertisement
Table of Contents
