Training Mode - Olivetti ECR 6920 F User Manual

NOTE: If you define a manager password of 0000, the
password security protection feature will not work.
Example: Define manager password 9876 for the PRG and
Z modes.
Switch to PRG and Z password definition mode
Type/Press:
Password
Defining an X Mode Manager Password
1. Control lock key position: PRG.
2. Press
press .
3. Type a [4-digit X mode manager password] and press
.
NOTE: If you define a manager password of 0000, the
password security protection feature will not work.
Example: Define manager password 6789 for the X mode.
Switch to X mode password definition mode
Type/Press:
Password
Clearing the PRG, Z and X Manager
Passwords
To clear a PRG, Z or X mode password, program password
sections "Defining a PRG and Z Mode Manager Password"
and "Defining an X Mode Manager Password".
Entering a Management Mode Using
a Password
If a manager password was defined to protect unauthorized
access to the PRG, Z and X modes, proceed as follows to
enter the specific password:
1. Control lock key position: PRG.
2. Type the specific 4-digit password.
3. Press .

Training Mode

The training mode allows you to use the cash register to
perform true sales transactions for learning purposes. All
transactions performed in this mode are not recorded in the
management financial reports and the sales receipts are not
numbered consecutively: four asterisks are printed instead.
18
and then
by following the instructions in
When the cash register is switched to the training mode, all
training transactions are performed in the REG or MGR
mode.
You can also print a detailed training report to keep track of
the transactions performed in this mode. See "Training
Report" for details.
To use the training facility from the PRG mode:
1. Control lock key position: PRG.
2. Press
A line appears on the display to indicate that the cash
register is in the Training Mode.
3. Turn the control lock key to REG or MGR to perform
training sales transactions.
To exit the training facility from the PRG mode:
1. Control lock key position: PRG.
2. Press
To access the training facility from the REG mode:
1. Control lock key position: REG.
2. Type your [4-digit password] and press
A line appears on the display to indicate that the cash register
is in the Training Mode.
To exit the training facility from the REG mode:
1. Control lock key position: REG.
2. Type your [4-digit password] and press
Programming a Training Mode Password
A training mode password prevents unauthorized access to
the training facility from the REG mode.
1. Control lock key position: PRG.
2. Press
press .
3. Type a [4-digit password] and press
NOTE: Do not assign a password 0000.
Example: Define training mode password 9876.
Switch to Training mode password definition mode
Type/Press:
Password
.
.
.
.
and then
.