Training Mode - Olivetti ECR 7700LD eco Plus SD User Manual

Training mode

The Training Mode allows using your cash register to
perform sales transactions for learning purposes.
All that transactions,
like password setting, will be stored on your SD card
under a specific folder called "TRAINING".
The Training report will also be printed at the end
of the JRNL report, under a specific section.
See chapter "Electronic Journal Reports".
When Training mode is active, X and Z mode are not
operative and no financial reports can be printed.
No settings modifications can be done.
Programming a Training Mode Password
A training mode password prevents unauthorized access
to the Training mode.
1. Control key position: PRG.
2. Press
3. Type your [4-digit password] and press
NOTE: If you assign "0000" as password, the Training
mode is free and the password will not be required for
Training mode activation/deactivation.
Example: Define training mode password 9876.
Type/Press:
Switch to Training
Training Mode password
Mode password
defined
definition mode
Training mode activation
1. Control key postion: PRG.
a. If you never inserted a [4-digits password] as
described in the chapter "Programming a Training
Mode Password" or the code you inserted is "0000",
press
b. If you inserted a [4-digits password] as described in
the chapter "Programming a Training Mode Password"
or the code is different from "0000",
- press
- type your [4-digit password] and press
2. A line appears on the display to indicate that the
Training mode is active on your cash register.
3. Turn the control key to REG or JRNL to perform Training
sales transactions.
14
and the related options,
.
.
Confirm entered
password
.
Training mode deactivation
1. Control key postion: PRG.
If you never inserted a [4-digits password] as
a.
described in the chapter "Programming a Training
Mode Password" or the code you inserted is "0000",
press
b. If you inserted a [4-digits password] as described
in the chapter "Programming a Training Mode
Password" or the code is different from "0000",
- press
- type your [4-digit password] and press
2. The line on the display disappears and the Training
Mode is no longer active on your cash register.
When a sale transaction is performed in Training mode,
the message
ENCAISSEMENT"
message.
.
.
"TICKET NON VALABLE
is printed under
.
.
.
POUR
the header