Printing Programming Reports; Training Mode - Olivetti ECR 8220 S User Manual

P P
RINTING ROGRAMMING
This section explains how to print the different reports that show how your cash register is programmed.
All programming reports can be requested from
Make sure you have enough paper in the printer to print the report.
NOTE: To interrupt printing, press and hold down
Programming Mode -> Programming dump .
1. Select
2. Use to navigate to the report you want to print.
3. Press to select the report. If the report is a range report go to step 4, otherwise go to step 5.
4. For range reports, you are prompted to specify the number the range report must start and end with. Type in the
number pressing
5. The report prints. To interrupt printing, press and hold down
Menu Item
All Departments
Department Range
Department Groups
All PLUs
PLU Range
PLU Link Department
Other Sales Prog
Print Mode
Clerk
Advanced Settings
Free Caption - 10
Chars
Free Caption - 24
Chars
Other Settings
T M
RAINING ODE
Training mode allows you to use the cash register to perform true sales transactions for learning purposes. All
transactions performed in this mode are not recorded in the management financial reports and sales receipts are not
numbered consecutively. When the cash register is switched to training mode, all training transactions can be
performed in Registration and Manager modes. You can also print a detailed training report to keep track of the
transactions performed, see "X and Z Reports" for details. To keep track of training activities, you can program a clerk
specifically as a Training clerk. In this way, any operator needing to perform training activities can log on as the Training
clerk. See "Individual Clerk" for how to create this type of clerk.
34
R
EPORTS
Main menu -> Programming Mode -> Programming dump .
after entering each.
Description
Possible Values
(no entry) Report showing how all the departments are programmed:
1 to 99 Report showing how a range of departments is programmed. In
reply to the prompt, enter the number of the department you want
the range to start from and the number to end with.
0 to 11 Report showing the departments linked to a given department
group. Enter the number of the department group.
11= All department groups.
(no entry) Report showing how all PLUs are programmed:
1 to Report showing how a range of PLUs is programmed. In reply to
99999999999999 the prompt, enter the number of the PLU you want the range to
start from and the number to end with.
1 to 99 Report showing the PLUs linked to a given department. Enter the
number of the department.
(no entry) Report showing sales function settings.
(no entry) Report showing how receipt printing mode and report printing
mode are programmed.
(no entry) Report showing how all clerks are programmed:
(no entry) Report showing how the Advanced Settings options in the
Configuration Setup menu are programmed.
(no entry) Report showing the reprogrammable 10-character entries.
(no entry) Report showing the reprogrammable 24-character entries.
(no entry) Report showing other configuration settings.
.
.