Using Multiple Ssids On The Lte5366 - ZyXEL Communications LTE5366 Series User Manual

Check the status of your wireless connection in the screen below.
7
If the wireless client keeps trying to connect to or acquiring an IP address from the LTE5366, make sure
8
you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the LTE5366.
If your connection is successful, open your Internet browser and enter
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.

4.4 Using Multiple SSIDs on the LTE5366

You can configure more than one SSID on a LTE5366. See
This allows you to configure multiple independent wireless networks on the LTE5366 as if there were
multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That is, each SSID on
the LTE5366 represents a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the LTE5366 (such as a printer).
Chapter 4 Tutorials
LTE5366 Series User's Guide
40
http://www.zyxel.com
Section 7.4 on page 76.
or the URL