Paper Size Sensor Board Assembly Removal - Lexmark C910 Service Manual

Hide thumbs Also See for C910:

Table of Contents

Paper Size Sensor Board Assembly Removal

1. Open the top unit and remove the RIP cover, RIP board, RIP

box, and electronic box. Remove the upper cassette, front cover

B, and back cover. Open the turn guide and paper feed cover

and remove the duplex unit. Remove the left side cover and

power supply A.

2. Disconnect the connector and remove the two screws from the

paper size sensor board, and remove the board.

3. Remove the screw from the size detection lever, and remove the

Service Manual