Double Layer Buttonhole; Knit Buttonhole #14 (Mode 2); Stretch Buttonhole #15 (Mode 2) - Kenmore 385.19606 Owner's Manual

Double layer buttonhole
To make a solid and sturdy buttonhole, sew another layer
of buttonhole over the previous stitches.
After the buttonhole is finished, simply start the machine
again.
Do not raise the foot or buttonhole lever.
The machine will sew another layer of buttonhole in the
following order and stop automatically when it is completed:
Step 1: Straight stitching in reverse to go back to the
starting point
Step 2: Front bartack and left row
Step 3: Right row
Step 4: Back bartack and locking stitches at the end
Note: When sewing the second layer do not restart the
machine before the first layer is completely finished.
Knit Buttonhole #14 (mode 2)
Stitch pattern: #14 (mode 2)
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Adjustable range for buttonhole width: 2.5 to 7.0
* Adjustable range for stitch density: 0.7 to 1.2
1I
i
The machine will sew a buttonhole in the following order
and stop automatically when it is completed:
Straight stitching and left row
Front bartack
Straight stitching, back bartack and right row
e_
|
Stretch Buttonhole #15 (mode 2)
Stitch pattern: #15 (mode 2_
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Adjustable range for buttonhole width: 2.5 to 7.0
* Adjustable range for stitch density: 0.5 to 2.5
The machine will sew a buttonhole in the following order
and stop automatically when it is completed:
Front bartack and left row
Back bartack and right row
84