Round End Buttonhole (Bh 2); Keyhole Buttonhole (Bh 3); Adjusting The Stitch Width And Density In Buttonholes 2 And 3 - Kenmore 385.19606 Owner's Manual

Round end Buttonhole (BH 2)
Stitch pattern: BH2
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Sewing procedure is the same as BH 1.
Starting point
Bartacking
Keyhole Buttonhole (BH 3)
Stitch pattern: BH 3 (mode 1)
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Sewing procedure is the same as BH 1
Starting point
Bartacking
Use the eyelet puncher to open the keyhole
buttonhole.
_@Eyelet puncher
BH2
0
Adjusting the Stitch Width and Density in
Buttonholes 2 and 3
Adjustment of the stitch width in 8H 2
When you press the zigzag width key, the pre-set
buttonhole width is set for the rounded buttonhole at
4.0. Press "+" or "-" to adjust the stitch width of the
entire buttonhole between 2.5 to 5.5.
Width: 2.5
Width: 4.0
Width: 5.5
Adjustment of the stitch width Jn BH 3
When you press the zigzag width key, the pre-set
buttonhole width is set for the keyhole buttonhole at 7.0.
Press "+" or "-" to adjust the stitch width of the entire
buttonhole between 5.5 to 7.0.
Width: 5.5
Width: 6.0
Width: 7.0
• To change the stitch density
The adjustment of the stitch density is between 0.25 to
1.0 the same as BH1. (refer to page 80)
82