Garmin GNC 300 Pilot's Manual page 93

The GNC 300' s approach select page allows you to review the available
approach procedures at the destination airport. From the procedures list, you may
select and activate a new procedure on the fly. The active approach is indicated by an
on-screen asterisk, and the scrolling arrow prompt indicates which direction to scroll
to view additional procedures.
To select or replace a procedure from the approach select page...
R
1. Press the key and rotate
2. To review all available procedures, rotate
3. To select a procedure, press
E
4. Press . If there are multiple IAFs for the selected approach, rotate
E
desired IAF and press
You may also replace or delete the active approach from the route catalog page.
To replace or delete an approach from the route catalog page...
R
1. Press the key and rotate
C
2. Press twice and rotate
3. To replace the active approach procedure, rotate
E
and press . If there are multiple IAFs for the selected approach, rotate
the desired IAF and press
4. To delete the active approach (denoted by an asterisk), highlight the approach and press
\ E
, followed by .
O
until the approach select page appears.
K
.
C O
twice and rotate to highlight the desired procedure.
.
O
until the route catalog page appears.
K
until the 'approach?' prompt appears. Press
O
to highlight the desired procedure
E
.
O
to select the
E
.
O
to select
APPROACH NAVI-
APPROACH NAV
GATION
Approach Select Page
GPS Approach
Approach Select Page
Clearing the active approach.
SECTION
6
83