Garmin GNC 300 Pilot's Manual page 60

REFERENCE
SECTION
WPT KEY
3
CPA Diagram
Waypoint Comments
Entering waypoint comments.
Waypoints with Comments List
50
The last page available through the GNC 300' s WPT key is the waypoint com-
ments page, which lists all waypoints that have a user comment. User comments
may be added to 250 waypoints stored in the user or NavData
you to note two lines of special information concerning a particular waypoint.
To enter user comments:
1. Enter the waypoint identifier from any waypoint page (see page 34), and press
remove the flashing cursor.
O
2. Rotate to display the 'comments' page.
C O
3. Press and use to highlight either the second or third line.
K O
4. Use and to enter the comment.
E
5. Press to accept, and repeat steps 4 and 5, if necessary, to enter information on
another line.
C
6. Press to remove the cursor.
To view the 'waypoints with comments' list:
W O
1. Press and use to display the 'Wpts with comments' page.
K
2. Use to scroll through the list.
The GNC 300 will display the waypoints with comments in alphabetical order, up
to six waypoints at a time. The scrolling arrow prompt will indicate which direction
to scroll to view additional waypoints.
To view comments for a selected waypoint:
1. Highlight the desired waypoint and press
O
2. Rotate to display any other available pages for the selected waypoint.
®
database, and allow
C
E
.
to