Garmin GNC 300 Pilot's Manual page 54

REFERENCE
SECTION
WPT KEY
Duplicate & Locked
3
User Waypoints Waypoints
User Waypoint Page
User Waypoint Comments Page
Entering a user waypoint name.
44
User Waypoint Information
In addition to the airport, VOR, NDB and intersection waypoints contained in your
NavData® card, the GNC 300 allows you to store up to 1,000 user-defined waypoints.
Once a user waypoint is created, two user waypoint pages will display the following
information:
• Waypoint identifier
• Position in latitude and longitude
• Identifier, range and bearing from a reference waypoint
• User comments
To scroll between the user waypoint position page and the user comments page,
rotate O. User waypoints may be created or modified using the W key. After select-
ing the waypoint identifier, as shown on page 34, you will be prompted to enter infor-
mation if the waypoint is new. There are three ways to create a user waypoint' s posi-
tion from the W key:
1. Enter the exact position of the new waypoint.
2. Reference a known waypoint.
3. Enter a range and bearing from your current position.
To create or edit a user waypoint:
W
1. Press .
C
2. Press twice and use
K O
3. Use and to enter the waypoint identifier. Press
O E
to highlight the 'user?' field. Press
E
.
.