Garmin GNC 300 Pilot's Manual page 79

The 'cum or leg' field can be selected to display cumulative distance and ete/eta or
the distance and ete/eta for each individual route leg. If cumulative is selected, the
first leg' s distance will be displayed. The second leg will represent the first leg' s dis-
tance plus the second leg, and so on. This also applies to the ete/eta field, which may
also be configured to display the desired track (dtk) for each leg, regardless of the
cumulative or leg selection.
To change the leg and ete/eta fields:
1. With the flashing cursor active, rotate
K
2. Rotate to select the desired setting and press
The active route page may also be used to create a new route or edit the route you
are currently navigating, and provides a fast method of selecting any route waypoint
as your next destination waypoint without modifying the active route. If you are edit-
ing the active route and want to save it in its original form, copy it to an open storage
route before editing.
To add waypoints to the active route:
C
1. Press twice, if necessary, to activate the cursor.
O
2. Use to highlight the first blank waypoint field,
you would like to add the new waypoint.
K O
3. Use and to enter the new waypoint identifier. Press
E \
4. Press to accept or
waypoint field, and the remaining route waypoints (if any are present) will re-sequence
the list accordingly.
O
to highlight the field you want to change.
C
.
or highlight the waypoint before which
E
.
to cancel. The cursor will automatically move to the next
APPENDIX B
ROUTES
NavData &
Active Route Page
User Data Cards
Inserting Waypoints
Active route page with cumulative distance and
desired track displayed.
Active route page with leg distance and estimated
time enroute displayed.
Adding KEMP waypoint to the active route.
SECTION
5
69