Garmin GNC 300 Pilot's Manual page 102

APPROACH NAVI-
APPROACH NAV
SECTION
GATION
6
Selecting &
Activating STARs
Selecting &
Selecting a STAR.
Selecting a STAR transition.
92
Standard Terminal Arrival Routes (STARs) used in the GNC 300 are selected and
activated with the same procedures as SIDs. Available STARs may be selected for the
destination airport at any time in the active route as long as the destination airport is
the last waypoint in the active route or the direct-to waypoint. Activating a STAR will
modify the sequence of waypoints in Route 0. If you'd like to save the contents of
Route 0, be sure to copy it to an empty storage route first.
To select and activate a STAR...
R O
1. Press and rotate
C O
2. Press and rotate
E
3. Press . The STAR waypoints will be inserted in the route.
If a STAR has more than one transition or runway, the STAR select page will
display the transitions and/or runway designations available.
To select a transition...
O
1. Rotate until the desired transition flashes and press
To select a runway...
O
1. Rotate until the runway designation flashes and press
until the STAR select page appears.
until the desired STAR flashes.
E
.
E
.