Garmin GNC 300 Pilot's Manual page 49

Garmin gnc 300 pilot's guide owner's manual & reference
Hide thumbs Also See for GNC 300:
Table of Contents

Advertisement

The airport communication page displays the radio frequencies and usage for
the selected airport, as well as sector and altitude restrictions.
To view the communication page from any of the airport information pages:
O
1. Rotate
with the flashing cursor removed to display the communication page.
K
2. Rotate
in the direction of the arrow prompt to view additional frequencies. You may
also view additional frequencies with the cursor on by rotating the
The following descriptions and abbreviations are used on the communication page:
Frequencies without restriction information:
• ats - Automatic terminal information service (ATIS)
• ptx - Pre-taxi
• clr - Clearance delivery
• gnd - Ground
• twr - Tower
• uni - Unicom
• mul - Multicom
• atf - Aerodrome traffic frequency
• ctf - Common traffic advisory frequency (CTAF)
• mf - Mandatory frequency
• oth - Other frequencies
Frequencies with restriction information:
• dep - Departure
• arv - Arrival
• cta - ICAO control area
• class C
'Receive only' frequencies will display an 'rx' indicator, while 'transmit only'
frequencies will display a 'tx'. If a frequency has sector and/or altitude restrictions,
they will also be displayed. Sector restrictions define a range of radials from the
facility, while altitude restrictions may describe an area above, below or between
altitudes. Additional instructions, if available, will be displayed on the bottom line.
O
knob.
• apr - Approach
• class B
• tma - ICAO terminal control area
• trsa - Terminal radar service area
REFERENCE
WPT KEY
Airport
User Waypoints
Communications Page
Airport Communications Page for KCLT.
Frequency Page with Sector Restrictions.
Airport Communication Page for 3VS.
SECTION
3
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 300tso

Table of Contents