Garmin GNC 300 Pilot's Manual page 86

Garmin gnc 300 pilot's guide owner's manual & reference
Hide thumbs Also See for GNC 300:
Table of Contents

Advertisement

APPROACH NAVI-
APPROACH NAV
SECTION
GATION
6
Basic Rules of
GPS Approaches
Selecting an
5 nm
5 nm
Unlike a VOR, GPS CDI deflection is based
on the actual distance from the desired
course, regardless of how far away you are
from the destination.
76
2
2
nm
nm
5 nm
5 nm
• If you cross the same waypoint twice in succession during an approach (e.g.,
the IAF and FAF at the same waypoint, or radar vectors to the FAF), you
must set the GPS SEQ switch to the HOLD position PRIOR to crossing the fix
the first time to prevent the GPS from sequencing to the next waypoint.
• During a GPS approach, keep in mind that your external HSI will display the
same CDI needle deflection and scale as the CDI on the GNC 300, which will
transition from 5.0 to 0.3 nm through the approach. Also note that unlike a
VOR CDI, the GPS CDI scale is based on the cross-track distance to the desired
course (the distance to the reference waypoint does not have an effect on the
CDI scale).
• The HSI course select should always be set 2 seconds BEFORE changing the
GPS SEQ from HOLD to AUTO to ensure the desired course to the next way-
point is settled prior to use by the GPS and give the autopilot sufficient time
to react to the heading change.
• GPS always displays distance from the currently active waypoint. When
determining distance along the approach, use caution to determine the cor-
rect distance from the approach chart.
• RAIM must be available (the GNC 300 automatically monitors RAIM, and will
display a message if it is not available) from the FAF to the MAP. If RAIM is
not available or becomes unavailable during this leg, the HSI NAV flag will
appear, and you must fly the missed approach procedure.
• When flying a missed approach, SID or STAR, you must fly all published pro-
cedures and ensure that all printed course and altitude restraints are achieved.
• If you are off course to the MAP waypoint and use a direct-to to re-center the
d-bar, the active approach will be cancelled.
• SUA alerts are disabled when an approach is selected and armed and the air-
craft is less than 30 nm from the destination airport. SUA information is still
available from the NRST key at all times.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 300tso

Table of Contents