Garmin GNC 300 Pilot's Manual page 34

REFERENCE
NAV KEY
SECTION
1
Scheduler,
Checklists
Sunrise & Sunset
NAV Menu 2
Executing a checklist.
NAV Menu 2
Approach Timer
24
To execute a checklist:
N O
1. Press and rotate
C
2. Press twice and rotate
3. Scroll through available checklists using
C O
4. Press and use to highlight the checklist you would like to see. Press
E
5. Press to check off list items.
To delete a checklist item or an entire checklist:
1. To delete a checklist item, highlight the desired item and press
2. To delete an entire checklist, highlight the desired list and press
The GNC 300' s NAV Menu 2 provides access to various timer and planning func-
tions, including:
• Approach timer
• Trip Timer
• Scheduler
The approach timer acts as either a count up or a count down timer that can be
set or reset at any time.
To activate/change/view the approach timer:
N O
1. Press and rotate
C
2. Press twice and rotate
K
3. Rotate to select either 'Count up' or 'Count down'. Press
K O
4. Use and to set the time to begin counting from. Press
O
5. Rotate to select the desired function: 'Start', 'Stop', or 'Reset'. Press
until NAV Menu 1 is displayed.
O
until 'Chklist?' is highlighted. Press
K
.
\
, followed by
\
• Clock (Date and time)
• RAIM Prediction
• Sunrise and sunset calculations
until NAV Menu 2 is displayed.
O
until 'Appr Time?' is highlighted. Press
E
.
E
.
E
.
E
.
E
.
E
, followed by .
E
.
E
to execute.