Garmin GNC 300 Pilot's Manual page 50

REFERENCE
SECTION
WPT KEY
3
Autostore ™ &
Airport Runway Page
User Comments
Airport Runway Page for KICT.
To view additional runways, rotate the inner knob
in the direction of the arrow prompts.
40
The airport runway page displays runway designations, length, surface and
lighting for the selected airport, as well as ILS/localizer and/or pilot-controlled light-
ing frequencies.
To view the runway page from any of the airport information pages:
O
1. Rotate with the flashing cursor removed to display the runway page.
2. To view additional runway information, rotate
The scrolling arrow prompt, located beside the identifier field, indicates which direction to
scroll for additional runway information.
If a localizer and ILS are used on the same runway, rotating K will display
both sets of information.
The following descriptions and abbreviations are used on the airport runway
page:
Runway surfaces:
• hard - Hard (concrete, asphalt, etc.)
• seal - Sealed surface
• dirt - Dirt surface
• unkn -Unknown surface
Runway lighting:
• pt lights - Part time lights
• ft lights - Full time lights
• pc -
• no lights - No runway lighting
K
with the flashing cursor removed.
• turf - Turf (grass)
• grav - Gravel surface
• soft - Unknown soft surface
• watr - Water landing site
Pilot controlled (with frequency)