Garmin GNC 300 Pilot's Manual page 100

APPROACH NAVI-
APPROACH NAV
SECTION
GATION
6
Selecting &
Activating SIDs
Selecting &
Selecting a SID.
Selecting a SID transition.
90
The Jeppesen database used in the GNC 300 features Standard Terminal Arrival
Routes (STARs) and Standard Instrument Departures (SIDs) that may be placed into
any active or stored route.
Available SIDs may be selected for the departure airport at any time in the active
route as long as the departure airport is the first route waypoint and the route con-
tains more than one waypoint. SIDs may be selected for the nearest airport when the
first route waypoint is not an airport or the route contains less than two waypoints.
Activating a SID will modify the waypoint sequence of Route 0. If you'd like to save
the contents of Route 0, be sure to copy it to an empty storage route first.
To select and activate a SID...
R O
1. Press and rotate
2. With the flashing cursor inactive, rotate
C
3. Press twice and rotate
E
4. Press . The SID waypoints will be inserted in the route.
If a SID has more than one runway or transition, the SID select page will display
the available runway designations and/or transitions.
To select a transition...
O
1. Rotate until the transition name flashes and press
To select a runway...
O
1. Rotate until the runway designation name flashes and press
until the SID select page appears.
K
until the desired SID name appears.
O
until the SID name flashes.
E
.
E
.