Garmin GNC 300 Pilot's Manual page 73

The route editing function allows you to create new routes and edit existing
routes. Creating routes before takeoff can help make route operations easier during
your flight.
To create or edit a route from the route catalog page:
K
1. Use to display the route number you would like to edit.
C
2. Press twice.
K
3. Use to select 'edit?'. Press
To add a waypoint:
O
4. Rotate to highlight the first blank waypoint field or the point where you want to enter
the new waypoint. The first waypoint field will flash if you're creating a new route.
K O
5. Use and to enter the waypoint's identifier. Press
E
6. Press to confirm the 'ok?' prompt on the waypoint confirmation page.
7. Repeat steps 4 through 6 to add the next waypoint, or press
To delete a waypoint:
O
1. Rotate to highlight the waypoint you wish to delete.
2. Press \ to remove the name, then press
3. Repeat steps 1 and 2 to delete additional waypoints, or press
To delete an entire route:
K
1. Use to display the route number you would like to delete (route 0 for the active route).
C
2. Press twice and use
K
3. Use to select 'delete?'. Press
E
. The route review page will appear.
E
.
C
to finish.
E
to delete.
C
to finish.
O
to highlight the action field.
E
to delete.
APPENDIX A
ROUTES SECTION
5
Creating &
Runway Length &
Editing Routes
Display Timeout
Selecting the route edit function.
Adding a waypoint to route 1.
63