Garmin GNC 300 Pilot's Manual page 61

The GNC 300' s extensive waypoint database makes it possible for several way-
points to share the same identifier. To ensure that you are selecting the waypoint
desired, the GNC 300 will always offer the waypoint confirmation page (which
shows the waypoint' s position) when an identifier is entered for a particular function.
To accept the waypoint position:
E
1. Press with the cursor over the 'ok?' prompt.
To reject the waypoint position:
\
1. Press with the cursor over the 'ok?' prompt.
Once a waypoint has been accepted or rejected, the previous page will be dis-
played. If there is more than one waypoint available for a selected identifier, the GNC
300 will display a duplicate waypoint page for you to choose the desired waypoint.
The waypoint identifier and number of duplicates will be shown at the top of the
page, with the waypoint type and region of each duplicate indicated below. The way-
points listed are sorted by the distance from your present position.
To scroll through additional duplicate waypoints:
O
1. Rotate with the flashing cursor active, or
To select the desired waypoint from the duplicates list:
1. Activate the flashing cursor and rotate
E
2. Press . The waypoint confirmation page will appear.
E
3. Press over the 'ok?' prompt to accept the waypoint or
and return to the duplicate waypoints list.
K
with the flashing cursor inactive.
O
to highlight the desired waypoint.
\
to reject the waypoint
REFERENCE
WPT KEY
Search and Rescue
Waypoint Confirmation
Operations
Waypoint Confirmation Page
Duplicate Waypoints Page
SECTION
3
51