Garmin GNC 300 Pilot's Manual page 57

The GNC 300' s AutoStore TM
waypoints. AutoStore is used to instantly capture your present position as a user way-
point with a touch of a button and add the new waypoint to the end of a specified
route if desired.
To perform an AutoStore:
N O
1. Press and rotate
E
2. Press .
This will display the 'Save' waypoint screen, which will allow you to rename the
waypoint and choose the route for it to be added to. The GNC 300 will assign the
next available three-digit number as the default waypoint name, preceded by a '+'
sign. This will help you differentiate AutoStore waypoints from other user waypoints.
To change the name or the route of an AutoStore waypoint:
O
1. Rotate to select the name or route number field.
K
and O to enter the name or route number. If you do not want to add the way-
2. Use
point to a route, be sure to keep the route field blank.
E
3. Press to accept.
E
4. Press to confirm the 'ok?' prompt.
If the waypoint name is already used for another waypoint, you will be informed
with the message 'WPT exists ______'. The default waypoint number will be redis-
played, and you may enter a different name.
function provides another method of creating user
to display the position page.
REFERENCE
WPT KEY
Route Information
Creating Waypoints
with AutoStore
AutoStore waypoint with default name.
The default waypoint name may be changed
before saving the waypoint.
SECTION
3
47