Table of Contents
Advertisement
8
Maintenance
The Xerox Wide Format 6622 Solution requires minimum operator maintenance. You
will need to replace the toner cartridge when the cartridge it is empty. You also will need
to clean the outside surface of the printer when necessary.
This chapter provides the procedures for performing the required tasks and for ordering
supplies and cleaning the machine.
• Replacing the Toner Cartridge (C-01 code)
• Cleaning the Charge Scorotron Wire
• Cleaning the LED Print Head
• Cleaning the Machine Surface
• Cleaning the Scanner
• Ordering Supplies
Toner Cartridge Replacement (C-01)
When the Toner Cartridge is empty, the Toner Empty indicator on the Operator Panel
flashes.
The printer will continue to operate during a low toner condition. However, when the
Toner Empty light remains on continuously, the printer will not operate.
The Toner Cartridge can be replaced even when the printer is operating. To replace the
Toner Cartridge, follow the instructions in the Replacing the Toner Cartridge section of
this chapter.
®
8-1
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
