Table of Contents
Advertisement
Maintenance
5. Install the cartridge into the Toner Supply Mechanism while keeping the green sealed
opening on the upper side of the cartridge.
6. Close the Toner Supply Latch.
7. Rotate the Toner Cartridge downward 90°F to access the seal, then gently remove
the seal by pulling to the left.
NOTE
If the cartridge is in any other position, toner will spill out of the cartridge.
8. Continue to rotate the Toner Cartridge downward into position until it stops.
9. Close the both the Left and Right Side Doors.
Status Code U-06 will go out.
The Toner Level Display on the display panel will scroll until the new level is read and
the new toner level is displayed.
10. Dispose of the empty Toner Cartridge properly by sealing the opening of the cartridge
with tape or put the cartridge in a plastic bag before recycling or discarding. Refer
to the Xerox Wide Format 6622 Safety and Certification Guide for details.
8-4
®
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
