Xerox Wide Format 6622 User Manual page 189

Problem
Part of the image is missing
on the print, or is smudged
or unclear.
Dirt appears at equal
intervals.
The print has black dots.
The print has black lines.
White dots appear in black
filled areas.
®
Xerox Wide Format 6622 Solution
User Guide
Solution
- If the media is damp, some parts of the image may not print,
or the print may be smudged and unclear. Replace the damp
media with new, dry media.
- If media is folder or wrinkled, remove the defective media and
replace with new media.
- Check the touch screen for a "toner empty" message.
- Print a few pages to try to remove dirt that could have gotten
into the paper feed path.
- If this does not solve the problem, contact your Xerox Customer
Support Center. Internal parts may have become soiled.
Contact your Xerox Customer Support Center. Internal
components may have become soiled.
- Contact your Xerox Customer Support Center. Internal
components may have become soiled.
- Adjust the print Density.
- Load the correct media type.
- If the correct media type is loaded and the problem persists,
contact your Xerox Customer Support Center. Internal components
may have become soiled.
Problem Solving
9-9