Table of Contents
Advertisement
System Administration
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
Sleep Timeout
The procedure for setting up the Sleep mode is as follows. The setting range is 5 to 240
minutes. The factory default setting for Sleep mode is 55 minutes.
1. Press the Services button on the Control Panel.
The Services menu screen displays.
2. Select Machine Info.
The Machine Info screen displays.
3. Select the Administration tab.
4. Select Control Panel.
5. Select Configure timers....
The Set Timeout Durations screen displays.
6. Select Sleep Timeout.
The Sleep Timeout Duration Sleep Timeout screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
NOTE
The Sleep Mode setting cannot be less that the Low Power Mode setting.
NOTE
In European markets, the legally mandated EMC directive is to keep the Sleep
Timer setting below 1 hour (60 minutes).
Feature Timeout
The Feature Timeout option controls how long the current feature parameters will remain
in effect after the user action, such as a key press. The Feature timer can be set between
10 and 300 seconds. The default value for this feature is 5 minutes.
1. Press the Services button on the Control Panel.
The Services menu screen displays.
2. Select Machine Info.
The Machine Info screen displays.
3. Select the Administration tab.
4. Select Control Panel from the Administration tab.
5. Select Configure timers....
The Set Timeout Durations screen displays.
6. Select Feature Timeout.
The Set Timeout Durations Feature Timeout screen displays.
5-16
®
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
