2. Open the Toner Cartridge Latch and rotate the Toner Cartridge 180 degrees in an
upward direction until the notch near the Toner Supply Hole on the cartridge is visible.
3. Pull down on the left end of the Toner Cartridge Latch and remove the cartridge by
grasping the left end.
4. Shake the new cartridge several times in order to prepare the contents for use and
remove the foam band from the cartridge.
NOTE
Do not apply pressure to the center of the cartridge. Pressure may cause the
toner to spill from the ends of the cartridge.
®
Xerox
Wide Format 6622 Solution
User Guide
Maintenance
8-3