Sound Settings; Configure Timers; Low Power Timeout - Xerox Wide Format 6622 User Manual

Sound Settings

The Sound Settings options determine whether or not tones will sound when the user
presses control panel buttons, makes an invalid entry on the control panel or touch
screen, or when a fault occurs. The factory default setting for all audible tones is On.
1. Press the Services button on the Control Panel.
2. Select Machine Info from the Services menu screen.
The Machine Info Screen displays.
3. Select the Administration tab.
4. Select Control Panel.
The Control Panel menu displays.
5. Select Sound Settings.
The Sound Settings... screen displays.
6. Move the slider to the desired sound volume.
7. Select Save and Close.

Configure Timers

The Configure Timers selection of the [Control Panel] screen allows you to set up the
values for the time-out features. The timeout features are defined on the following
pages.

• Low Power Timeout

• Sleep Timeout
• Features Timeout
• File Deletion Timeout
• Print Interrupt Timeout
Low Power Timeout
This setting is the amount of time that must elapse since the last user operation, such
as a button press, until the machine enters the Low Power mode. The setting range is 5
to 240 minutes. The default setting for Low Power mode is 15 minutes.
1. Press the Services button on the Control Panel.
2. Select Machine Info from the Services menu screen.
The Machine Info screen displays. .
3. Select the Administration tab.
4. Select Control Panel.
5. Select Configure timers...
The Set Timeout Durations Screen displays.
6. Select Low Power Timeout.
The Set Timeout Duration Low Power Timeout screen displays.
®
Xerox Wide Format 6622 Solution
User Guide
System Administration
5-15