Print Reports Tab; Print Reports; From The User Interface - Xerox Wide Format 6622 User Manual

Machine Info

Print Reports Tab

The Print Reports selection allows you to print a report that shows the hardware and
software configurations of your machine.
• Configuration Test Print (a Printer Configuration Report)
• Setup Test Print (a Printer Settings Report)
• Pen Palettes Report (All or One)
• PostScript Test Print (shows the configuration)
• All Test Prints (all four of the above printed as a single job)
The Print Reports tab also allows you to print diagnostic prints. The use of standard test
patterns helps determine the root cause of image quality problems. The diagnostic print
choices include
• Scanner Test Print (copy/scan only)

Print Reports

The procedure below explains how to print a configuration report that lists the hardware
and software configuration, communication parameter (port) settings and system
parameter settings of the printer. Configuration reports may be printed from either the
User Interface or Web Printer Management Tool on your client workstation.
The Diagnostic Prints may be printed using the User Interface only. You may not print
them using Web Printer Management Tool.
NOTE
Print Report jobs are stored in the Reprint Queue and are reprintable. If Immediate
Image Overwrite is disabled and the Recall feature is enabled then a configuration
report will become the last job in the queue.

From the User Interface

1. Select Machine Information on the Services menu.
2. Select the Print Reports tab.
3. Select from the Configuration Reports options:
• Configuration Test Print- A one page printer configuration report.
• Setup Test Print - A one page Printer Settings report prints.
• Pen Palette - A multi-page Pen Palette Settings report prints.
• PostScript ®
- A PostScript report prints if PostScript is loaded.
• All - Listed all the reports as a single job
4. Select the Diagnostic Prints option:
6-6 ®
Xerox Wide Format 6622 Solution
User Guide