Table of Contents
Advertisement
User Modes
User Mode 1- U1(Test Print)
An electronically stored test print can be printed. The pattern of the test print and the
width of the test print are preset and cannot be changed.
1. To enter User Mode 1 press the Menu Key once when the printer is in the Standby
(idle) Mode.
The Menu Key lights green and the left side of the Status Display indicates U1
flashing. The right side of the Status Display indicates the test print status.
• - - - (on steady): Test print mode is not available, printer warming
• 000 (on steady): Test print is available.
• 000 (flashing): Test print in process
2. Press the Enter Key when "000" on the Status Display is on steady.
The test print begins and "000" on the Status Display flashes.
When the printer finishes the test print, "000" on the Status Display stops flashing.
3. Press the Online Key to exit the User Mode.
User Mode 2 - U1(Date and Time)
Enter User Mode 2 to set the correct date and time.
7-2
®
Xerox
Wide Format 6622 Solution
User Guide
Advertisement
Table of Contents
