Temporary Menu; Test Print Menu (Setup Item 2 Of 7 Total) - Xerox 8254E User Manual

4.6.1.27 Temporary menu

Temporarily displays all of the possible selections in the Setup submenus.
Setup item
Temporary
4.6.2

Test Print menu (Setup item 2 of 7 total)

Allows you to perform Nozzle Check of the print head, Mode Print, Palette Print and to print the Setup list.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel's display. Pressing the [-] key once causes "Menu2: Test Print>" to display. (The > character after a
menu name indicates that there are sub-menus under that menu.)
From the "Menu2: Test Print>" display, press the [>] key. This takes you to the first sub-menu titled
"Test1: Nozzle Check." Pressing the [-] and [+] keys allows you to increment up or down to each of the
Setup items in the left column below.
• Refer to the following for the operation procedure of TestPrint.
3.6 Test printing
Setup item
Nozzle Check
Mode Print
8254E / 8264E User Guide
Setting
ALL On Displays all of the selections in the Setup submenus.
• Pressing the [Enter] key after "Temporary" is
• Pressing the [Cancel] key returns the Setup
• The following item is never displayed
• Feed
Performs the Nozzle Check printing.
Used to check whether there are any clogged heads, or missing or blurred prints.
3.6.2 Nozzle Check
Allows Mode Print to be performed.
Used to confirm the following printing conditions.
• Print quality
• Effect
• Pre-Heater temperature
• Platen Heater temperature
• After Heater temperature
• Adjustment value
3.6.3 Mode Print
Description
displayed turns on all selections for the setup
submenus as long as you remain in the setup sub
menus. (An asterisk * next to a selection indicates it
is turned on.)
submenus to their previous settings.
4.6.5 Selection menu (Setup item 5 of 7 total)
even when ALL On is selected.
Description
4 Handling The Printer
113