Section 2. Getting Ready To Sew; Connecting The Power Supply; Controlling Sewing Speed; Speed Controt Lever - Janome 385.8080200 Owner's Manual

SECTION 2. GETTING READY TO SEW
Connecting the Power Supply
1. Turn the power switch OFF.
2. Insert the foot control jack into the machine socket.
3. Insert the machine plug into the machine socket.
4. Insert the power supply plug into the outlet.
5. Turn the power switch ON.
6. The LED display will show "01" (straight stitch)
after one second.
O Power switch
(_) Controll plug
(_) Machine socket
G Machine plug
(_) Power supply plug
(_ Outlet
Controlling Sewing Speed
Speed control lever:
You can set the maximum speed by the speed control
lever.
O Slide the lever to the right for higher speed.
(_) Slide the lever to the left for slower speed.
Foot Controller Model 21249 is used with Sewing
Machine Model 8080.
Foot control:
Sewing speed is varied by the foot control.
The harder you depress the foot control, the faster the
machine runs.
CAUTION:
Do not place anything on the foot control when the
machine is not in use.
f
......... ,munnnnniUg||lll,_
® @
J
Polarized Plug
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of an electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not
modify the plug in any way.