Appliqu; Scallop Stitch; Patchwork - Janome 385.8080200 Owner's Manual

Table of Contents

Advertisement

Appliqu_
Machine setting
@ Pattern
® LED display
Foot
F: Satin stitch foot
Baste or glue applique pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When turning corners, lower the needle down into the
outer edge of the applique, and raise the presser foot
to pivot the fabric.
28 29 30 31
®
(2o1
®
}
Scallop
Stitch
Machine setting
@ Pattern
® LED display
G Foot
A: Zigzag foot
Sew on the right side of fabric along the edge leaving
a 1 cm allowance.
After sewing, trim the allowance close to the stitching
taking care not to cut the thread.
33
_
_---_
_'3=J
®
f
Patchwork
Machine setting
@ Pattern
® LEDdisplay
(_ Foot
34
38
F: Satin stitch foot
Seam two layers of the fabric with right side together.
Open the fabric flat and sew the pattern over the
seam line on the right side of the fabric.
I
F
68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8080

Table of Contents