Janome 385.8080200 Owner's Manual page 24

(_ Mode selection key
Press this button to enter one of the following modes.
[] Pattern selection mode:
Press the Up.or Down.key until the pattern
number of the desired stitch appears on the LED
display.
[] Stitch width adjusting mode:
Press the Up _ key to increase the stitch width or
Down _ key to decrease.
NOTE:
you can adjust the stitch width while the machine is
running,
[] Stitch length adjusting mode:
Press the Up _ key to increase the stitch length or
Down _? key to decrease.
NOTE: 1
You can adjust the stitch length while the machine is
running.
® Direct pattern selection
The following four patterns can be directly selected by
pressing the corresponding key.
#01 Straight stitch
#06 Sensor buttonhole
#10 Zigzag stitch
#12 Serging stitch
[]
[]
[]
®
:l:J: r ., 01 06 10 12
I
12