Getting Ready To Sew Connecting The Machine To The Power Supply; Controlling Sewing Speed - Janome HD523 Instruction Manual

w
q
t
r
GETTING READY TO SEW
Connecting the Machine to the Power
Supply
e
z Turn off the power switch.
x Insert the machine plug into the machine
socket.
c Insert the power supply plug into the outlet.
v Turn on the power switch to activate the power
and sewing light.
q Power supply plug*
w Power switch
e Outlet
r Machine socket
t Machine plug
* The power supply plug included may differ from
the illustration.
CAUTION:
Before connecting the power cord, make
sure the voltage and frequency shown on the
machine conform to your electrical power.
NOTE:
While in operation, always keep your eyes
on the sewing area, and do not touch any
moving parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
– when leaving the machine unattended.
– when attaching or removing parts.
– when clearning the machine.
Do not place anything on the foot control,
otherwise the machine will run inadvertently.

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the foot control, the
faster the machine runs.
5