The Class Setup Screen - ZyXEL Communications EMG3425-Q10A User Manual

Table 58 Management > Bandwidth MGMT > Queue Setup: Add/Edit new queue
LABEL
Rate Limit
Back
Apply
Cancel

20.5 The Class Setup Screen

Use this screen to add, edit or delete QoS classifiers. A classifier groups traffic into data flows
according to specific criteria such as the source address, destination address, source port number,
destination port number or incoming interface. For example, you can configure a classifier to select
traffic from the same protocol port (such as Telnet) to form a flow.
You can give different priorities to traffic that the EMG3425-Q10A forwards out through the WAN
interface. Give high priority to voice and video to make them run more smoothly. Similarly, give low
priority to many large file downloads so that they do not reduce the quality of other applications.
Click Management > Bandwidth MGMT > Class Setup to open the following screen.
Figure 81 Management > Bandwidth MGMT > Class Setup
The following table describes the labels in this screen.
Table 59 Management > Bandwidth MGMT > Class Setup
LABEL
Add new Classifier
#
Status
Class Name
Classification
Criteria
DSCP Mark
802.1P Mark
VLAN ID Tag
Chapter 20 Bandwidth Management
DESCRIPTION
Specify the maximum transmission rate (in Kbps) allowed for traffic on this queue.
Click this to return to the previous screen.
Click this to save your changes.
Click this to exit this screen without saving.
DESCRIPTION
Click this to create a new classifier.
This is the index number of the entry.
This field displays whether the classifier is active or not. A yellow bulb signifies that this
classifier is active. A gray bulb signifies that this classifier is not active.
This is the name of the classifier.
This shows criteria specified in this classifier, for example the interface from which
traffic of this class should come and the source MAC address of traffic that matches this
classifier.
This is the DSCP number added to traffic of this classifier.
This is the IEEE 802.1p priority level assigned to traffic of this classifier.
This is the VLAN ID number assigned to traffic of this classifier.
EMG3425-Q10A User's Guide
138